1.Product Description
The machine is an intermittent motion and hole plate type filling fully automatic capsule filling equipment. It adopt optimization design combined the characteristics of Chinese medicine and the requirement of GMP, it has the characteristics of compact mechanism, small volume, lower noise, precision filling dosage, multi-function, running stably etc. It can finish the following motion at same time: capsule feeding, capsule separating, powder filling, capsule rejecting, capsule locking, finished capsule discharge and module cleaning etc. This machine is designed for meet the volume-produce on the basis of model NJP-1200 automatic capsule filling machine. It increases the lifting mechanism that easy to clean. It saves the cost and manpower for the enterprise that need volume-produce.
2.Paramètres techniques
| Equipment Model | NJP-2500C | |
| Paramètres techniques | Poids de la machine | 1300kg |
| Dimension globale | (1100+50) × (1010+190) × (1950+150) mm | |
| Puissance du moteur | 3.37kw + 3kw (Dust Collector) | |
| Alimentation électrique | 3 phases, AC 380V, 50Hz | |
| Max. Sortie | 150,000capsules/hr | |
| Taille de la capsule | 00#～5# et capsule de sécurité A～E | |
| Taux d'utilisation de la capsule | ≥ 99.5% | |
| Indice de bruit | ≤ 75Dba | |
| Différence de dosage | ≤ ±3% (sous un dosage de plus de 300 mg et 40~80 mesh après granulation) | |
| Compress air | Gas displacement 0.06m3/min Pressure 0.3Mpa | |
| Approvisionnement en eau | Pompe à cycle d'eau réservoir d'eau composé, ou source d'eau rencontrée | |
| Degré de vide | -0,02～-0,06 MPa | |
| Volume d'eau | 250L/heure | |
| Entrer le diamètre intérieur du tuyau | 20 mm | |
| Diamètre intérieur de la goulotte | 27 mm | |
| Température de travail | 21℃ ± 3℃ | |
| Humidité relative de travail | 40～55% | |
| Capacité d'échappement | 300m3/h | |
| Fonction spéciale | Granule and powder mixed filing; Granule and tablet mixed filling; Powder collector function
(Another pipeline collect powder in the filling port, needn’t disinfect and accede to hopper directly) |
|
| Model C: passage à la commande PLC | ||
| Matériau | Spare part contact with medicine adopt superior S.S 304 & 316L | |
| Critère | Conform to GMP completely | |
| Modèle | NJP-3800C | |
| Poids de la machine | 2400kg | |
| Oversell | 1440×1300×2080mm | |
| Puissance du moteur | 6.37kw+Vaccum3kw | |
| Puissance | 3P 4L AC 380V;50Hz | |
| Max.Capacity | 228000pcs/hr | |
| Filling Capsule NO. | 00#～5#、safe capsule A～E | |
| Capsule | ≥99.5％ | |
| Noise | ≤75dBA | |
| Difference in loading | 300mg≤±3％（After granulation and granulation, 40~80 mesh granules are filled） | |
| Compress Air | 0.09m3/min 0.3Mpa | |
| Water Source Requirements | The water ring vacuum pump distribution tank is used for recycling, and it can also be connected to an external water source | |
| Vacuum Degree | 0.02～-0.06 MPa | |
| Water Flow | 250L/h | |
| Inlet Pipe Inner Dia. | 20 mm | |
| Inner Dia. of Drain Pipe | 27 mm | |
| Working Environment Temperature | 21℃±3℃ | |
| Height Requirements of Working Workshop feeding≥2.8m | Manual feeding≥2.6m, vacuum feeding≥2.8m | |
| Relative Humidity of Working Environment | 40～55％ | |
| Displacement | 300m3/h | |
| Special Function | Can add pellet filling device; powder collector function | |
| Système de contrôle | Variable frequency stepless speed regulation, PLC control | |
| Matériau | The parts in direct contact with the capsule and medicine are made of 304 and 316L high-quality stainless steel | |