1.Product Description
The machine is an intermittent motion and hole plate type filling fully automatic capsule filling equipment. It adopt optimization design combined the characteristics of Chinese medicine and the requirement of GMP, it has the characteristics of compact mechanism, small volume, lower noise, precision filling dosage, multi-function, running stably etc. It can finish the following motion at same time: capsule feeding, capsule separating, powder filling, capsule rejecting, capsule locking, finished capsule discharge and module cleaning etc. This machine is designed for meet the volume-produce on the basis of model NJP-1200 automatic capsule filling machine. It increases the lifting mechanism that easy to clean. It saves the cost and manpower for the enterprise that need volume-produce.
2.技術パラメーター
| Equipment Model | NJP-2500C | |
| 技術パラメーター | 機械重量 | 1300kg |
| 全体寸法 | (1100+50) × (1010+190) × (1950+150) mm | |
| モーター出力 | 3.37kw + 3kw (Dust Collector) | |
| 電源 | 3相、AC 380V、50Hz | |
| 最大最大出力 | 150,000capsules/hr | |
| カプセルサイズ | 00#～5#および安全カプセルA～E | |
| カプセル使用率 | ≥ 99.5% | |
| ノイズ指数 | ≤ 75Dba | |
| 投与量の違い | ≤ ±3% (300mg以上投与、造粒後40~80メッシュの場合) | |
| Compress air | Gas displacement 0.06m3/min Pressure 0.3Mpa | |
| 給水 | 水循環ポンプ、複合水槽、または水源のある場所 | |
| 真空度 | -0.02～-0.06MPa | |
| 水量 | 250L/時 | |
| パイプ内径を入力 | 20mm | |
| ウォータースパウト内径 | 27mm | |
| 使用温度 | 21℃ ± 3℃ | |
| 作業相対湿度 | 40～55% | |
| 排気量 | 300m3/h | |
| 特殊機能 | Granule and powder mixed filing; Granule and tablet mixed filling; Powder collector function
(Another pipeline collect powder in the filling port, needn’t disinfect and accede to hopper directly) |
|
| Model C: PLC制御にアップグレード | ||
| 素材 | Spare part contact with medicine adopt superior S.S 304 & 316L | |
| 基準 | Conform to GMP completely | |
| モデル | NJP-3800C | |
| マシン重量 | 2400kg | |
| Oversell | 1440×1300×2080mm | |
| モーター・パワー | 6.37kw+Vaccum3kw | |
| パワー | 3P 4L AC 380V;50Hz | |
| Max.Capacity | 228000pcs/hr | |
| Filling Capsule NO. | 00#～5#、safe capsule A～E | |
| Capsule | ≥99.5％ | |
| Noise | ≤75dBA | |
| Difference in loading | 300mg≤±3％（After granulation and granulation, 40~80 mesh granules are filled） | |
| Compress Air | 0.09m3/min 0.3Mpa | |
| Water Source Requirements | The water ring vacuum pump distribution tank is used for recycling, and it can also be connected to an external water source | |
| Vacuum Degree | 0.02～-0.06 MPa | |
| Water Flow | 250L/h | |
| Inlet Pipe Inner Dia. | 20mm | |
| Inner Dia. of Drain Pipe | 27mm | |
| Working Environment Temperature | 21℃±3℃ | |
| Height Requirements of Working Workshop feeding≥2.8m | Manual feeding≥2.6m, vacuum feeding≥2.8m | |
| Relative Humidity of Working Environment | 40～55％ | |
| Displacement | 300m3/h | |
| Special Function | Can add pellet filling device; powder collector function | |
| 制御システム | Variable frequency stepless speed regulation, PLC control | |
| 素材 | The parts in direct contact with the capsule and medicine are made of 304 and 316L high-quality stainless steel | |