1.Product Description
The machine is an intermittent motion and hole plate type filling fully automatic capsule filling equipment. It adopt optimization design combined the characteristics of Chinese medicine and the requirement of GMP, it has the characteristics of compact mechanism, small volume, lower noise, precision filling dosage, multi-function, running stably etc. It can finish the following motion at same time: capsule feeding, capsule separating, powder filling, capsule rejecting, capsule locking, finished capsule discharge and module cleaning etc. This machine is designed for meet the volume-produce on the basis of model NJP-1200 automatic capsule filling machine. It increases the lifting mechanism that easy to clean. It saves the cost and manpower for the enterprise that need volume-produce.
2.Parametry techniczne
| Equipment Model | NJP-2500C | |
| Parametry techniczne | Waga maszyny | 1300kg |
| Wymiar całkowity | (1100+50) × (1010+190) × (1950+150) mm | |
| Moc silnika | 3.37kw + 3kw (Dust Collector) | |
| Zasilanie | 3 fazy, AC 380V, 50Hz | |
| Maks. Wyjście | 150,000capsules/hr | |
| Rozmiar kapsułki | 00#～5# i kapsuła bezpieczeństwa A～E | |
| Szybkość użycia kapsułki | ≥ 99,5% | |
| Wskaźnik hałasu | ≤ 75Dba | |
| Różnica w dawkowaniu | ≤ ±3% (przy dawce większej niż 300 mg i siatce 40 ~ 80 po granulacji) | |
| Compress air | Gas displacement 0.06m3/min Pressure 0.3Mpa | |
| Zaopatrzenie w wodę | Pompa obiegu wody, zbiornik wody złożonej lub inne źródło wody | |
| Stopień próżni | -0,02～-0,06 MPa | |
| Objętość wody | 250 l/godz. | |
| Wprowadź średnicę wewnętrzną rury | 20 mm | |
| Średnica wewnętrzna bicza wodnego | 27 mm | |
| Temperatura robocza | 21℃ ± 3℃ | |
| Robocza wilgotność względna | 40～55% | |
| Wydajność wydechu | 300m3/h | |
| Funkcja specjalna | Granule and powder mixed filing; Granule and tablet mixed filling; Powder collector function
(Another pipeline collect powder in the filling port, needn’t disinfect and accede to hopper directly) |
|
| Model C: Aktualizacja do sterowania PLC | ||
| Materiał | Spare part contact with medicine adopt superior S.S 304 & 316L | |
| Kryterium | Conform to GMP completely | |
| Model | NJP-3800C | |
| Waga maszyny | 2400kg | |
| Oversell | 1440×1300×2080mm | |
| Moc silnika | 6.37kw+Vaccum3kw | |
| Moc | 3P 4L AC 380V;50Hz | |
| Max.Capacity | 228000pcs/hr | |
| Filling Capsule NO. | 00#～5#、safe capsule A～E | |
| Capsule | ≥99.5％ | |
| Noise | ≤75dBA | |
| Difference in loading | 300mg≤±3％（After granulation and granulation, 40~80 mesh granules are filled） | |
| Compress Air | 0.09m3/min 0.3Mpa | |
| Water Source Requirements | The water ring vacuum pump distribution tank is used for recycling, and it can also be connected to an external water source | |
| Vacuum Degree | 0.02～-0.06 MPa | |
| Water Flow | 250L/h | |
| Inlet Pipe Inner Dia. | 20 mm | |
| Inner Dia. of Drain Pipe | 27 mm | |
| Working Environment Temperature | 21℃±3℃ | |
| Height Requirements of Working Workshop feeding≥2.8m | Manual feeding≥2.6m, vacuum feeding≥2.8m | |
| Relative Humidity of Working Environment | 40～55％ | |
| Displacement | 300m3/h | |
| Special Function | Can add pellet filling device; powder collector function | |
| System kontroli | Variable frequency stepless speed regulation, PLC control | |
| Materiał | The parts in direct contact with the capsule and medicine are made of 304 and 316L high-quality stainless steel | |