1.Product Description
The machine is an intermittent motion and hole plate type filling fully automatic capsule filling equipment. It adopt optimization design combined the characteristics of Chinese medicine and the requirement of GMP, it has the characteristics of compact mechanism, small volume, lower noise, precision filling dosage, multi-function, running stably etc. It can finish the following motion at same time: capsule feeding, capsule separating, powder filling, capsule rejecting, capsule locking, finished capsule discharge and module cleaning etc. This machine is designed for meet the volume-produce on the basis of model NJP-1200 automatic capsule filling machine. It increases the lifting mechanism that easy to clean. It saves the cost and manpower for the enterprise that need volume-produce.
2.Technical Parameter
| Equipment Model | NJP-2500C | |
| Technical Parameter | Machine weight | 1300kg |
| Overall dimension | (1100+50) × (1010+190) × (1950+150) mm | |
| Motor power | 3.37kw + 3kw (Dust Collector) | |
| Power supply | 3 phase, AC 380V, 50Hz | |
| Max. Output | 150,000capsules/hr | |
| Capsule size | 00#～5# and safety capsule A～E | |
| Capsule using rate | ≥ 99.5% | |
| Noise index | ≤ 75Dba | |
| Dosage difference | ≤ ±3% (under more than 300mg dosing and 40~80 mesh after granulation) | |
| Compress air | Gas displacement 0.06m3/min Pressure 0.3Mpa | |
| Water supply | Water cycle pump compound water tank, or meet water source | |
| Vacuum degree | -0.02～-0.06 MPa | |
| Water volume | 250L/hour | |
| Enter pipe inner-diameter | 20mm | |
| Waterspout inner-diameter | 27mm | |
| Working temperature | 21℃ ± 3℃ | |
| Working relative humidity | 40～55% | |
| Exhaust capacity | 300m3/h | |
| Special function | Granule and powder mixed filing; Granule and tablet mixed filling; Powder collector function
(Another pipeline collect powder in the filling port, needn’t disinfect and accede to hopper directly) |
|
| Model C: upgraded to PLC control | ||
| Material | Spare part contact with medicine adopt superior S.S 304 & 316L | |
| Criterion | Conform to GMP completely | |
| Model | NJP-3800C | |
| Machine Weight | 2400kg | |
| Oversell | 1440×1300×2080mm | |
| Motor Power | 6.37kw+Vaccum3kw | |
| Power | 3P 4L AC 380V;50Hz | |
| Max.Capacity | 228000pcs/hr | |
| Filling Capsule NO. | 00#～5#、safe capsule A～E | |
| Capsule | ≥99.5％ | |
| Noise | ≤75dBA | |
| Difference in loading | 300mg≤±3％（After granulation and granulation, 40~80 mesh granules are filled） | |
| Compress Air | 0.09m3/min 0.3Mpa | |
| Water Source Requirements | The water ring vacuum pump distribution tank is used for recycling, and it can also be connected to an external water source | |
| Vacuum Degree | 0.02～-0.06 MPa | |
| Water Flow | 250L/h | |
| Inlet Pipe Inner Dia. | 20mm | |
| Inner Dia. of Drain Pipe | 27mm | |
| Working Environment Temperature | 21℃±3℃ | |
| Height Requirements of Working Workshop feeding≥2.8m | Manual feeding≥2.6m, vacuum feeding≥2.8m | |
| Relative Humidity of Working Environment | 40～55％ | |
| Displacement | 300m3/h | |
| Special Function | Can add pellet filling device; powder collector function | |
| Control System | Variable frequency stepless speed regulation, PLC control | |
| Material | The parts in direct contact with the capsule and medicine are made of 304 and 316L high-quality stainless steel | |