제품 설명
This product is specially designed by our company for the filling of prefilled syringes. It is an automatic packaging equipment for aseptic and efficient filling of syringes. The equipment runs smoothly, is easy to operate, and is equipped with intelligent detection devices. It has high automation, high work efficiency and easy maintenance. It is an ideal equipment for filling and plugging prefilled syringes.
특징
- This product is widely applicable toSCF (Prefilled syringe) syringes from BD, BG, SCHOTT and major domestic manufacturers. Other types of syringes can also be customized.
- 표면은 SUS304 스테인리스 스틸로 만들어졌으며 접촉 부품은 SUS316L 스테인리스 스틸과 의료용 실리콘 고무로 만들어져 GMP 사양의 요구 사항을 완벽하게 충족합니다.
- 세라믹 플런저 펌프는 정량 충전을 실현하고 산 및 알칼리 부식에 강하며 내마모성 및 고온에 강하고 충전 정확도가 높습니다.
- The conveying and sorting of the rubber plugs are realized by the vibratory feeder, which is made of SUS316L stainless steel clean plate with bright surface treatment and no clean dead corners.
- It adopts internationally renowned electrical components and implements interference-free modular control. Synchronous actions are all controlled by servo motors. Automatic filling and stoppering are implemented, which is accurate, reliable and easy to operate.
- 모터의 작동은 PLC 프로그래밍 컨트롤러에 의해 제어됩니다. 인간-컴퓨터 상호 작용 인터페이스는 각 스테이션의 작동 상태를 실시간으로 모니터링하고 표시하며, 오류 위치를 실시간으로 자동 경보 및 표시하고 오류 프롬프트를 표시합니다.
- 다양한 충전 용량과 충전 방법을 사용할 수 있습니다.
- The injection needle is used for filling with the liquid level rising to prevent splashing of liquid medicine.
- The vacuum filling system is suitable for viscous materials to ensure that the liquid medicine fills the filling space without bubbles or faults, and improves the qualified rate of finished products.
- The vacuum stopper system avoids particles generated by the vibration and friction of the rubber stopper, and ensures that the rubber stopper is in close contact with the liquid surface.
- Modular design, easy to locate, easy to expand, can be used as a stand-alone machine, can also be connected to the nesting machine, rotating rod machine, labeling machine, light inspection machine and other equipment to form a production line.
- 옵션으로 수백 단계의 층류 후드를 사용하여 높은 수요의 깨끗한 생산을 달성할 수 있습니다.
The Main Technical Parameters
| Applicable Materials | 액체 및 연고 |
| Applicable Syringe Specifications | 0.5-10ml（Different specifications of syringes need to replace the mold） |
| 채우기 Range | 0.3-10ml（The filling pump needs to be replaced when the filling volume differs greatly） |
| Number of Filling Heads | 1 |
| Number of Capping Heads | 1 |
| 채우기 Accuracy | ≤±1% |
| Production Capacity | 600-800 p/h |
| Total Power | 2KW |
| 전압 | 380V/220V 50/60Hz |
| Compressed Air | 0.55-0.75Mpa 15L/S |
| 치수 | L808×W758×H1760mm（Without laminar flow hood） |
| Total Weight | 380KG |